首页 > 新闻动态 > 行业新闻 > Declining for two years in a row of global per capita steel consumption
浏览分类
行业新闻
公司新闻
认证
新产品
联系我们
哈尔滨虹科技有限公司地址:C2-02汉帝大厦,松北颇,哈尔滨,中国邮政编码:150028网站地址:http://www.fastenerequipmentsupplier.com电话:86-... 现在联系

快乐新,到 2017 年 !

愿所有的合作的工厂和客户有展望的年 !

165年代的一部分前到达孟买港口

一套165年代的一组刚刚到达印度港口孟买。

最大直径一个钥匙成型螺母钻机2主轴螺母敲击机

螺母敲击机是一种机械加工设备,可以通过孔或盲孔(例如螺母和法兰)处理各个零件孔内侧的内部螺纹,螺钉或牙齿;螺母敲击机还称为螺母敲击机,螺...

紧固件毛刺处理知识

什么是紧固件毛刺?紧固件毛刺指的是紧固件表面极细小的显微金属颗粒,这些颗粒就被我们成为毛刺。 紧固件毛刺是如何形成的?当紧固件在进行切...

常规弹簧洗衣机与

它由一块薄板组成,中间有一个薄板,中间有一个开口,洗衣机用于分发象牙。所有洗衣机均设计用于分配经过验证的负载,但有几种类型包括正常和春季...

分析弹簧洗衣机的原理和功能

在各种机械连接中,螺栓的抗宽面条是一个非常重要的联系,并且有许多方法可以防止生命中螺栓松开,包括使用弹簧垫圈来防止松动。弹簧垫圈通常被称...

什么是自动敲击螺丝?

自动敲击螺钉:类似于机器螺钉,但是螺钉上的螺纹带有螺纹的特殊自动敲击螺钉。用于固定两个薄金属组件的连接,以使其变为整体。 总体而言,由于...

三种基本螺纹紧固件连接的防松方法

基本螺纹紧固件连接的防松方法分为三种基本类型: a.不可拆卸的防松 这是一种采用焊牢、粘结或冲点铆接等方式将可拆卸螺纹连接改变为不可拆卸螺...

一些常见的坚果

1.十六进制螺母:这些螺母也称为六角形坚果,具有六个平坦的侧面,是使用最广泛的螺母。它们被设计为用扳手或插座拧紧或松开。 2.方形螺母:方螺...

非标准件如何防潮防湿 三大措施来应对

所谓非标准件主要指的是没有按照国家标准规格,没有相关的参数规定之外,有紧固件企业自由控制其配件,非标准件的种类很多,应用也很广泛,如:家具、电...

浏览分类

Declining for two years in a row of global per capita steel consumption

2016-08-16 14:32:21

Based on the annual statistics from The World Steel Association, the global per capita apparent consumption of finished steel in 2015 has declining for two consecutive years, which decreases to 208.2 kilograms, 4.1% decreased comparing with the volume of 217.1 kilograms of last year and 4.4% decreased comparing with the volume of 217.8 kilograms in 2013. However, the consumption of 2015 is still higher than that of 2012.

In Asia, there is a sharp decline of China’s average consumption of steel in 2015. The average consumption of steel in Japan and Taiwan decline to 497.3 kilograms and 750.6 kilograms respectively. On the contrary, the consumption of India and South Korea keep growing and India reaches its highest record of 60.6 kilograms. However, it still fails to reach the level of one-third of the global average. South Korea maintains the top of the global average consumption of steel, which reaches 1113.6 kilograms. But it is still lower than the consumption of 1207.4 kilograms in 2008.

In America, the average consumption of steel of North America and Central and South America both decline. The average consumption of steel of USA, Canada and Brail decrease to 297.4 kilograms, 404.6 kilograms and 102.6 kilograms respectively. Mexico and Argentina keeps growing, which increase to 190.6 kilograms and 121 kilograms.

In European Union, the average consumption of steel reaches 303.5 kilograms in 2015, which maintains increasing for three consecutive years. But it is still lower than the volume of 311.6 kilograms in 2011.

Africa keeps increasing for 5 consecutive years, which reaches 33.1 kilograms in 2015. But it is still the lowest average consumption of steel in the world.