首页 > 新闻动态 > 行业新闻 > Bulten investing €6 million in Polish plant
浏览分类
行业新闻
公司新闻
认证
新产品
联系我们
哈尔滨虹科技有限公司地址:C2-02汉帝大厦,松北颇,哈尔滨,中国邮政编码:150028网站地址:http://www.fastenerequipmentsupplier.com电话:86-... 现在联系

热浸锌和热浸镀锌之间的差异

热浸锌和热浸镀锌是两种用于金属腐蚀保护的过程,热浸锌通常比热浸镀锌更好的耐腐蚀性。 热浸锌是将钢浸入高温锌溶液中的过程中,用较厚的锌层覆...

什么是冷锻 – 冷锻工艺、材料、用途、优点和缺点

分析弹簧洗衣机的原理和功能

在各种机械连接中,螺栓的抗宽面条是一个非常重要的联系,并且有许多方法可以防止生命中螺栓松开,包括使用弹簧垫圈来防止松动。弹簧垫圈通常被称...

High speed installation cold forging machine bolts and nuts making machine for screw

螺母攻丝机工作原理

螺母攻丝机是在螺母、法兰等各种通孔或盲孔的孔内侧加工内螺纹、螺钉或牙扣的机械加工设备;螺母攻丝机又叫螺母攻丝机、螺母攻丝机、自动螺母攻丝...

最大直径一个钥匙成型螺母钻机2主轴螺母敲击机

螺母敲击机是一种机械加工设备,可以通过孔或盲孔(例如螺母和法兰)处理各个零件孔内侧的内部螺纹,螺钉或牙齿;螺母敲击机还称为螺母敲击机,螺...

热门流行的冷锻造机螺栓形成机器,带有Inveter良好设计

Harbin Rainbow Technology Co.,Ltd是中国最大的紧固件设备经销商和制造商之一。我们已经投资了一家寒冷的前工厂(Ningbo),一家螺纹滚动机厂(...

什么是自动敲击螺丝?

自动敲击螺钉:类似于机器螺钉,但是螺钉上的螺纹带有螺纹的特殊自动敲击螺钉。用于固定两个薄金属组件的连接,以使其变为整体。 总体而言,由于...

China factory price and Advanced Automatic Screw Maker Thread Rolling Machine

Product Descriptionview more >>Frequently bought togetherHigh Speed Thread Rolling Machine Factory Price Thread Roller Hot Sale Thread M...

热锻造炉感应加热机Ipsen炉网网

Harbin Rainbow Technology Co.,Ltd是中国最大的紧固件设备经销商和制造商之一。我们已经投资了一家寒冷的前工厂(Ningbo),一家螺纹滚动机厂(...

浏览分类

Bulten investing €6 million in Polish plant

2016-08-23 14:47:42
With a planned annual capacity of around 10,500 tonnes, investment in the new line is expected to result in annual savings of €2 million – providing an estimated payback of just over three years. By extending this part of the manufacturing process Bulten expects to gain both value added and increased competitiveness. The investment will also mean less transportation, which will lead to a significantly reduced impact on the environment.
“Now we are taking another step towards becoming the industry’s most cost-efficient producer of fasteners. The investment in a new plating line will improve profitability, reduce working capital and provide greater flexibility and control over the process,” says Tommy Andersson, president and CEO of Bulten.
Bulten already carries out surface treatment at some of its other sites and is looking into the possibility to start finishing on more production units. The investment is subject to obtaining the necessary permits.