Operating Procedures of Thread rolling machine

The use of operating the rolling machine each shift must check, clean the machine tool, do a good job of daily maintenance of the rolling machine maintenance work to achieve neat, clean, lubrication, safety.

(I) Keep the appearance of the machine tool neat, clean, no yellow gown, grease, rust and corrosion. Keep the machine parts and main accessories intact and clean.

(ii) Keep the machine tool workplace and footplate clean and tidy. Keep all guide surfaces and sliding surfaces clean and lubricated; check all guide surfaces, table surfaces and sliding surfaces for damage (iii) Keep all parts of the lubrication system with sufficient oil, smooth oil circuit, eye-catching oil markers (windows), and lubrication apparatus clean and complete. Check the oil storage parts, lubrication parts and pipelines (including cooling system pipelines) have no leakage.

(iv) Maintain electrical appliances, limits and interlocking devices safe and reliable.

(v) Carry out timely maintenance of equipment according to regulations and make records. (vi) Fill in the time record on a monthly basis.

(vi) Without permission is not allowed to change (system) equipment (including the Department of accessories).

(vii) before work should check the machine tool rotation parts of the situation is normal, whether the protective device is complete, whether the work surface has excess, and will be the lubrication parts of the oil. Confirm that there is no problem before operation.

(viii) threaded rollers must be installed securely, adjustment and replacement of rollers must be stopped, the machine tool is not allowed to reach into the bed surface to adjust the workpiece or touch the machine tool.

(ix) the knife is not allowed to drive loosening and tightening of all screws, adjustments to tighten the nut before work.

(x) the operator’s energy must be concentrated, the hand to leave the running parts of the roller, in order to prevent pressure on the hand.